9200 Table Top Dispenser
The 9200 is a "plug and play" table top dispenser system for laboratory and dosing applications. It is supplied complete with pump unit, tube length, universal power supply and instruction manual.
Fitted with a quality 24 V DC motor geared to 312 rpm the 9200 is a fully programmable, compact, and ecconomic dispenser.
› Simple calibration to tube size and media (reagent)
› Dose to exact required volume
› Time interval dispense mode (programmable delay and number of repeats)
› Electronic flow control to 360 ml/min
› Continuous dispense mode
› Input for remote foot pedal (or system signal)
› Flow direction switch
› 24 V DC for safe operation
› Easy and quick tube replacement
› Compact construction
› Self priming
› Range of alternative tube materials and sizes available.
Return to Peristaltic Pumps for Liquid range.
Available to purchase online via BOX-it (see order information below).
Although shown here as a finished system the 9200 can additionally be customised to meet OEM requirements.
|ID Ø 1.6 mm tube||to 50 ml/m|
|ID Ø 2.4 mm tube||to 100 ml/m|
|ID Ø 3.2 mm tube||to 175 ml/m|
|ID Ø 4.8 mm tube (as supplied)||to 360 ml/m|
|Tube Materials||Silicone / Norprene G / Pharm-a-line (as supplied) / ED-Plex|
|Input Voltage||100 to 240 V / 50 to 60 Hz|
|Power Supply Unit Output||24 V DC 1A|
|Adapters||EU, UK, USA|
|Max pressure||1 bar|
|Max vacuum||-950 mbar|
|DC motor life||>1000 hour|
|Operating Temperature Range||10 to 40 °C|
|Storage Temperature Range||4 to 40 °C|
|Operating Relative Humidity||90%|
|Storage Relative Humidity||95%|
|CE marked to EEC directives|
All data is representative for initial selection purposes. It is the responsibility of the user to determine suitability for the intended use. These products are not suitable for in-vivo applications.