- Boxer Pumps
- Products
- Accessories
- 9QX / 9QQ / 9K Series
9QX / 9QQ / 9K Accessories
Available to purchase online via BOX-it (see order information below).
Tubing
The 9QX series is designed to accept single lengths or continuous tube.
The 9QQ and 9K series are designed to accept either tube sets (shown left) or continuous tube (shown right):
Tube sets consists of tube length, tube connectors and tube clips. The set is inserted directly in the cover.
Continuous tube consists of 1m (or multiple of) length of tube and tube clips, which must be ordered separately. Tube clips are inserted in the cover, then the length of tube is pushed into the clips with the loop touching the saddle as shown above.
Material Options
| Innovaprene | Economic premium medical grade thermosplastic elastomer for pharmaceutical, biological and food / beverage applications. |
| Suitable for sterilization via autoclave, ethylene oxide and gamma. FDA registered to 21CFR177.2600. | |
| ⇒ Technical, regulatory and compatibility data | |
| Pharm-a-line | Premium medical grade thermosplastic elastomer for pharmaceutical, biological and food / beverage applications. |
| Suitable for sterilization via autoclave, ethylene oxide and gamma. FDA registered to 21CFR177.2600. | |
| ⇒ Technical, regulatory and compatibility data | |
| Innovasil | Premium silicone tube for food and biomedical applications. Suitable for sterilization via autoclave or dry heat. FDA registered. |
| Lagoprene | Food grade thermoplastic elastomer for food and beverage applications. Complies with NSF 51 (food equipment materials) |
| and NSF / ANSI Standard 61 (drinking water system components). | |
| ED-Plex | Premium industrial grade thermoplastic elastomer for aqueous fluids, acids, bases and some oils / hydrocarbons. |
Tube Connectors (for Tube Sets)
The size of the tube connectors vary depending upon the size of the internal tube in the pump.
Order Information
Innovaprene
Tube lengths (for 9QX):
Part Number: 9000.767 Innovaprene ID ∅ 0.5 mm x single length ⇒ 
Part Number: 9000.768 Innovaprene ID ∅ 1.0 mm x single length ⇒
Part Number: 9000.769 Innovaprene ID ∅ 2.0 mm x single length ⇒
Part Number: 9000.770 Innovaprene ID ∅ 3.0 mm x single length ⇒
Part Number: 9000.771 Innovaprene ID ∅ 3.5 mm x single length ⇒
Tube sets (for 9QQ or 9K):
Part Number: 9000.761 Innovaprene ID Ø 0.5 mm with PP connectors for 0.5 to 1.0mm tubing ⇒
Part Number: 9000.762 Innovaprene ID Ø 1.0 mm with PP connectors for 0.5 to 1.0 mm tubing ⇒
Part Number: 9000.763 Innovaprene ID Ø 1.0 mm with PP connectors for 1.5 to 2.0 mm tubing ⇒
Part Number: 9000.764 Innovaprene ID Ø 2.0 mm with PP connectors for 2.0 to 2.5 mm tubing ⇒
Part Number: 9000.765 Innovaprene ID Ø 3.0 mm with PP connectors for 3.0 to 3.5 mm tubing ⇒
Part Number: 9000.766 Innovaprene ID Ø 3.5 mm with PP connectors for 3.0 to 3.5 mm tubing
Part Number: 9000.785 Evaluation Kit (of 0.5, 1.0, 2.0, and 3.0 mm tube sets) ⇒
Part Number: 9000.780 Innovaprene ID Ø 0.5 mm with PP connectors for 0.5 to 1.0mm tubing pack of 5 ⇒
Part Number: 9000.782 Innovaprene ID Ø 1.0 mm with PP connectors for 0.5 to 1.0 mm tubing pack of 5 ⇒
Part Number: 9000.783 Innovaprene ID Ø 1.0 mm with PP connectors for 1.5 to 2.0 mm tubing pack of 5 ⇒
Part Number: 9000.784 Innovaprene ID Ø 2.0 mm with PP connectors for 2.0 to 2.5 mm tubing pack 5 ⇒
Part Number: 9000.785 Innovaprene ID Ø 3.0 mm with PP connectors for 3.0 to 3.5 mm tubing pack of 5 ⇒
Part Number: 9000.786 Evaluation Kit (of 0.5, 1.0, 2.0, and 3.0 mm tube sets) pack of 5 ⇒
0.5mm tubing is suitable for 9QQ only!
Innovasil
Part Number: 9000.300 Innovasil ID Ø 0.5 mm with PP connectors for 0.5 to 1.0mm tubing ⇒
Part Number: 9000.301 Innovasil ID Ø 1.0 mm with PP connectors for 0.5 to 1.0 mm tubing ⇒
Part Number: 9000.302 Innovasil ID Ø 1.0 mm with PP connectors for 1.5 to 2.0 mm tubing ⇒
Part Number: 9000.303 Innovasil ID Ø 2.0 mm with PP connectors for 2.0 to 2.5 mm tubing ⇒
Part Number: 9000.304 Innovasil ID Ø 3.0 mm with PP connectors for 3.0 to 3.5 mm tubing ⇒
Part Number: 9000.305 Innovasil ID Ø 3.5 mm with PP connectors for 3.0 to 3.5 mm tubing
Part Number: 9000.310 Evaluation Kit (of 0.5, 1.0, 2.0, and 3.0 mm tube sets) ⇒
Part Number: 9000.311 Innovasil ID Ø 0.5 mm x mm with PP connectors for 0.5 to 1.0mm tubing pack of 5 ⇒
Part Number: 9000.312 Innovasil ID Ø 1.0 mm x 1 m mm with PP connectors for 0.5 to 1.0mm tubing pack of 5 ⇒
Part Number: 9000.313 Innovasil ID Ø 2.0 mm x 1 m mm with PP connectors for 0.5 to 1.0mm tubing pack of 5 ⇒
Part Number: 9000.314 Innovasil ID Ø 3.0 mm x 1 m mm with PP connectors for 0.5 to 1.0mm tubing pack of 5 ⇒
Part Number: 9000.315 Innovasil ID Ø 3.5 mm x 1 m mm with PP connectors for 0.5 to 1.0mm tubing pack of 5 ⇒
Part Number: 9000.317 Evaluation Kit (of 0.5, 1.0, 2.0, and 3.0 mm tube sets) ⇒
0.5mm tubing is suitable for 9QQ only!
For 15m coils ⇒ Innovaprene Tubing
Part Number: 9000.761 Innovasil ID Ø 0.5 mm with PP connectors for 0.5 to 1.0mm tubing ⇒
Part Number: 9000.762 Innovasil ID Ø 1.0 mm with PP connectors for 0.5 to 1.0 mm tubing ⇒
Part Number: 9000.763 Innovasil ID Ø 1.0 mm with PP connectors for 1.5 to 2.0 mm tubing ⇒
Part Number: 9000.764 Innovasil ID Ø 2.0 mm with PP connectors for 2.0 to 2.5 mm tubing ⇒
Part Number: 9000.765 Innovasil ID Ø 3.0 mm with PP connectors for 3.0 to 3.5 mm tubing ⇒
Part Number: 9000.766 Innovasil ID Ø 3.5 mm with PP connectors for 3.0 to 3.5 mm tubing
Part Number: 9000.785 Evaluation Kit (of 0.5, 1.0, 2.0, and 3.0 mm tube sets) ⇒
Pharm-a-line
Tube lengths (for 9QX):
Part Number: 9000.713 PHI ID ∅ 0.5 mm x single length ⇒
Part Number: 9000.714 PHI ID ∅ 1.0 mm x single length ⇒
Part Number: 9000.716 PHI ID ∅ 2.0 mm x single length ⇒
Part Number: 9000.718 PHI ID ∅ 3.0 mm x single length ⇒
Part Number: 9000.719 PHI ID ∅ 3.5 mm x single length ⇒
Tube sets (for 9QQ or 9K):
Part Number: 9000.567 PHI ID Ø 0.5 mm with PP connectors for 0.5 to 1.0mm tubing ⇒
Part Number: 9000.620 PHI ID Ø 1.0 mm with PP connectors for 0.5 to 1.0 mm tubing ⇒
Part Number: 9000.531 PHI ID Ø 1.0 mm with PP connectors for 1.5 to 2.0 mm tubing ⇒
Part Number: 9000.532 PHI ID Ø 2.0 mm with PP connectors for 2.0 to 2.5 mm tubing ⇒
Part Number: 9000.571 PHI ID Ø 3.0 mm with PP connectors for 3.0 to 3.5 mm tubing ⇒
Part Number: 9000.572 PHI ID Ø 3.5 mm with PP connectors for 3.0 to 3.5 mm tubing
0.5mm tubing is suitable for 9QQ only!
Continuous tube (for 9QX or 9QQ):
Part Number: 9000.566 PHI ID Ø 0.5 mm x 1 m (tube clips required, see below) ⇒
Part Number: 9000.535 PHI ID Ø 1.0 mm x 1 m (tube clips required, see below) ⇒
Part Number: 9000.536 PHI ID Ø 2.0 mm x 1 m (tube clips required, see below) ⇒
Part Number: 9000.537 PHI ID Ø 3.0 mm x 1 m (tube clips required, see below) ⇒
Part Number: 9000.547 PHI ID Ø 3.5 mm x 1 m (tube clips required, see below) ⇒
0.5mm tubing is suitable for 9QQ only!
For 15m coils ⇒ Pharm-a-line Tubing
Silicone
Tube lengths (for 9QX):
Part Number: 9000.749 Silicone ID ∅ 1.0 mm x single length
Part Number: 9000.750 Silicone ID ∅ 2.0 mm x single length
Part Number: 9000.751 Silicone ID ∅ 3.0 mm x single length
Tube sets (for 9QQ or 9K):
Part Number: 9000.752 Silicone ID Ø 0.5 mm with PP connectors for 0.5 to 1.0 mm tubing* ⇒ Part Number: 9000.752 Silicone ID Ø 1.0 mm with PP connectors for 1.0 to 1.0 mm tubing* ⇒
Part Number: 9000.753 Silicone ID Ø 1.0 mm with PP connectors for 1.5 to 1.0 mm tubing* ⇒
Part Number: 9000.754 Silicone ID Ø 2.0 mm with PP connectors for 2.0 to 1.0 mm tubing* ⇒
Part Number: 9000.755 Silicone ID Ø 3.0 mm with PP connectors for 3.0 to 1.0 mm tubing* ⇒
* depends on tube material being used
Continuous tube (for 9QX or 9QQ):
Part Number: 9000.757 Silicone ID Ø 1.0 mm x 1 m (tube clips required, see below) ⇒
Part Number: 9000.758 Silicone ID Ø 2.0 mm x 1 m (tube clips required, see below) ⇒
Part Number: 9000.759 Silicone ID Ø 3.0 mm x 1 m (tube clips required, see below) ⇒
All silicone tubing is peroxide or platinum cured.
Lagoprene
Tube lengths (for 9QX):
Part Number: 9000.734 Lagoprene ID ∅ 1.0 mm x single length
Part Number: 9000.736 Lagoprene ID ∅ 2.0 mm x single length
Part Number: 9000.738 Lagoprene ID ∅ 3.0 mm x single length
Tube Sets (for 9QQ or 9K):
Part Number: 9000.621 Lagoprene ID Ø 1.0 mm with PP connectors for 0.5 to 1.0 mm tubing* ⇒
Part Number: 9000.512 Lagoprene ID Ø 1.0 mm with PP connectors for 1.5 to 2.0 mm tubing* ⇒
Part Number: 9000.513 Lagoprene ID Ø 2.0 mm with PP connectors for 2.0 to 2.5 mm tubing* ⇒
Part Number: 9000.573 Lagoprene ID Ø 3.0 mm with PP connectors for 3.0 to 3.5 mm tubing* ⇒
* depends on tube material being used
Continuous tube (for 9QX or 9QQ):
Part Number: 9000.521 Lagoprene ID Ø 1.0 mm x 1 m (tube clips required, see below) ⇒
Part Number: 9000.506 Lagoprene ID Ø 2.0 mm x 1 m (tube clips required, see below) ⇒
Part Number: 9000.564 Lagoprene ID Ø 3.0 mm x 1 m (tube clips required, see below) ⇒
ED-Plex
Tube lengths (for 9QX):
Part Number: 9000.724 ED-Plex ID ∅ 1.0 mm x single length
Part Number: 9000.726 ED-Plex ID ∅ 2.0 mm x single length
Part Number: 9000.728 ED-Plex ID ∅ 3.0 mm x single length
Tube sets (for 9QQ or 9K):
Part Number: 9000.619 ED-Plex ID Ø 1.0 mm with PP connectors for 0.5 to 1.0 mm tubing* ⇒
Part Number: 9000.525 ED-Plex ID Ø 1.0 mm with PP connectors for 1.5 to 2.0 mm tubing* ⇒
Part Number: 9000.526 ED-Plex ID Ø 2.0 mm with PP connectors for 2.0 to 2.5 mm tubing* ⇒
Part Number: 9000.740 ED-Plex ID Ø 3.0 mm with PP connectors for 3.0 to 3.5 mm tubing* ⇒
* depends on tube material being used
Continuous tube (for 9QX or 9QQ):
Part Number: 9000.522 ED-Plex ID Ø 1.0 mm x 1 m (tube clips required, see below) ⇒
Part Number: 9000.523 ED-Plex ID Ø 2.0 mm x 1 m (tube clips required, see below) ⇒
Part Number: 9000.524 ED-Plex ID Ø 3.0 mm x 1 m (tube clips required, see below) ⇒
Tube Clips (for 9QQ)
Tube clips are required for the continuous tube configuration.
Order Information
Part Number: 9000.601 Tube clip for 0.5 and 1mm continuous tube, set of 2 ⇒
Part Number: 9000.616 Double tube clip for 1mm continuous tube, set of 2 ⇒
Part Number: 9000.602 Tube clip for 2mm continuous tube, set of 2 ⇒
Part Number: 9000.603 Tube clip for 3 and 3.5 mm continuous tube, set of 2 ⇒
Encoders
The DC / Gear motor versions are available with a back shaft encoder.
The output is 10 pulses per motor revolution. Number of pulses per pump revolution will depend upon the gear ratio of the motor.
The time delayed secound output (HA and HB) allows rotation direction detection.
The 10 cm of ribbon cable is terminated by a PHR-6 2.0mm pitch JST conector.
Pin 1 = Motor GND
Pin 2 = Motor +V (red)
Pin 3 = Vcc
Pin 4 = GND
Pin 5 = Output HA
Pin 6 = Output HB
Order Information
All encoders are supplied mounted on the rear end of the motor. Please enquire for part numbers of pumps including encoder.
Mounting Bracket
Optional mounting bracket (for DC / Gear version only)
Order Information
Part Number: 9000.613