|
|
|
Boxer 9000 — DC Peristaltic Pump for Liquids
|
|
DC or Stepper Motor oem peristaltic pumps for accurate dispense of liquids. From 0.5ml/min to 180ml/min |
|
· Easy tube replacement · Continuous or fixed tube length · Accurate dispense · 3 roller system · Integrated positional encoder (optional on DC version) · Wide choice of gear boxes · Choice of 3 tube diameters · Suitable for continuous operation · Panel mounting · No lubrication · Self priming · CE marked
|
|
Third angle projection. Pumps with back shaft encoder have the following pin assignment:
MOTOR- MOTOR+ HALL SENSOR Vcc HALL SENSOR GND HALL SENSOR A V OUT HALL SENSOR B V OUT
Magnet wheel has 10PPR Cable connector socket required: JST (Japan Solderless Terminals) PHR-6 P=2.0-6P
Pump ordering information:
Boxer 9000 266 rpm @12V DC................................................. 9000.000 Boxer 9000 520 rpm @12V DC................................................. 9007.000 Boxer 9000 375 rpm @12V DC with back shaft encoder............. 9501.000
Tubing ordering information: Santoprene tube IDØ1.0 with fitted connectors 75mm long......... 9000.512 Santoprene tube IDØ2.0 with fitted connectors 75mm long......... 9000.513 Santoprene tube IDØ3.0 with fitted connectors 75mm long......... 9000.514
Silicone tube IDØ1.0 with fitted connectors 75mm long............... 9000.504 Silicone tube IDØ2.0 with fitted connectors 75mm long............... 9000.505 Silicone tube IDØ3.0 with fitted connectors 75mm long............... 9000.510
Santoprene tube IDØ1.0 X1 meter length................................... 9000.511 Santoprene tube IDØ2.0 X1 meter length................................... 9000.506 Santoprene tube IDØ3.0 X1 meter length................................... 9000.515
Silicone tube IDØ1.0 X1 meter length........................................ 9000.507 Silicone tube IDØ2.0 X1 meter length........................................ 9000.509 Silicone tube IDØ3.0 X1 meter length........................................ 9000.508
All Silicone tubes are Platinum cured. |
|
DC Motor: ............................................................. 6V DC-24V DC Current at full speed........................................................... 450mA Max ambient operational temperature..................................... 50˚C Material wetted parts................................... Santoprene or Silicone Max pressure........................................................................ 1 bar Weight ......................................................................... 125g (DC) Life expectancy......................................................... >1000 hours Optional back shaft motor encoder..................... 160 pulses per rev
Use the following data to calculate your requested rotor speed: Flow per 360° rotor revolution
ID Ø1.0mm tube..................................................................... 48µl ID Ø2.0mm tube................................................................... 160µl ID Ø3.0mm tube................................................................... 345µl
Part No. 9000.000 Pump without encoder gear ratio 1:22.5 266rpm @ 12V DC Part No. 9501.000 Pump with back shaft encoder gear ratio 1:16 375rpm @ 12V DC
Standard tube diameters are IDØ1mm, Ø2mm& Ø3mm X 1mm wall. Model can be configured to work with 0.8mm wall tubing for low dispense volumes. |
|
9000.000 DC Motor |
