Unoverse 6000 — Multi channel peristaltic Pumps for Liquids driven by a geared DC motor

The Unoverse principle

 

Unoverse Pumps are built on the unique operational principle of balancing the load on the motor and gearbox shafts. The peristaltic tubes are positioned in pairs to both sides of the rollers.

 

Unoverse pumps are supplied with a standard of 8 rollers per channel. The 8 rollers enhance dispense accuracy and reduce pulsation. As the 8 rollers are step offset between the stages, a link between channels in two adjacent stages will further reduce pump pulsation.

 

Unoverse Pumps have a standard of 4 channels per stage and can be supplied in up to 3 stages.

 

Combined with large supporting bearings on the front and back of the rollers, the construction is ideal for long life, maintenance free operation.

 

 

Tubing can be specified from a wide range of diameters.

 

The tubes are generic size tube diameters, which are easily sourced, individually cut to length and clipped into the tube holders.

 

 

· From 2 to 12 channels

· High quality planetary gearbox

· Flow up to 50ml/min per channel

· DC gear motor for speed control

· High precision, eight or four rollers system

· Minimum pulsation

· Easy replacement of tubing

· No adjustments required

· No lubrication

· Compact construction

· Shortest tubing

· Maintenance free

· Self priming

UNOVERSE 6000 FLOW DATA

 

Based on virgin Pharmed tube

Water flow @ 20°C ml/min per channel

with no pressure

Optional rear motor shaft encoder

with 8 pulses per revolution

Standard  gearbox ratio is 13:1

104 pulses per full rev

*     1.0mm tube wall—requires special clip

**    1.6mm tube wall—requires special clip for max two channels per pump