Unoverse 6600— Ready to operate precision peristaltic dispenser

Unoverse 6600 range of Pump-Controllers is exclusively developed for scientific applications where precision and versatility go hand in hand.

 

The pump can be operated in both directions - for dispense or suction, at rotor speeds of up to 340rpm.

 

The simple to master controls allow you to dispense or aspirate any volume with high precision and accuracy. Dispense or aspirate protocol can be programmed to carry out endless repeats separated by interval periods from 1 second to 16.5 minutes.

 

Volumes can be calibrated to match a large variety of tube sizes and the display can be adjusted to show the desired working range in ml.

 

With the touch of the ‘Stop’ button, any pump operation will be terminated.

 

Unoverse 6600 is supplied as standard with a remote foot pedal, allowing the operator to keep both hands free .

 

For added safety and peace of mind, the low direct current voltage is supplied to the unit via a remote switch mode power supply.

 

 

· Variable speed

· Interval dispense mode

· Continuous dispense mode

· Foot pedal control

· From 2 to 12 channels

· Flow up to 200ml/min per channel

· Dual directional - dispense & aspirate

· High precision, four or eight rollers system

· Minimum pulsation

· Easy replacement of tubing

· No adjustments required

· No lubrication

· Compact construction

· Low voltage - 15V DC

· Maintenance free

· Self priming

8 channel ribbon tubing available as accessory from Uno International Ltd.

Technical Data:

 

Volume setting....................................................................... 0.000ml to 999.9ml

Calibration....................................................................................... Steps of 1µl

Max number of repeats......................................................................... Unlimited

Intervals.................................................................................. max 990 seconds

Max rotor speed...................................................................................... 340rpm

Max ambient operational temp..................................................................... 40˚C

Max media temperature.............................................................................. 50°C

Remote Power Supply........................................................ 230V/110V 50W 5.3A

Controller voltage................................................................................... 15V DC

 

Controller materials

Outer case................................................................ Mild Steel - Powder Coated

Tube clips................................................................................................. Acetal

Pump body parts....................................................... PPO (Polyphenylene oxide)

Tube connectors (standard)........................................................... Polypropylene

 

Dimensions

1 stage - 4 channel controller .......................................... 122(H)X186(W)x190(L)

2 stage - 8 channel controller .......................................... 122(H)X186(W)x210(L)

3 stage -12 channel controller .......................................... 122(H)X186(W)x230(L)

 

8 way Multilumen tubing, tube holders and other accessories available as extras.

 

 

See below for typical flow characteristics in ml/min per single channel.